Safety Management Systems and Control of Safety Documents
Standards such as ISO 45001 help organisations implement an occupational health and safety (OHS) management system. ISO 45001 requires that “documented information be controlled” (7.5.3).
In theory this sounds very good. But in practice it can often be difficult for people in the field to access the right document. The reasons for this are varied and might include:
- Formal documents are controlled in a separate system and not all employees have direct access to this system, or they may be unfamiliar with it.
- The organisation of controlled documents does not necessarily align with the way work is being done. This makes finding the right information for the right step in the process difficult.
- Temporary employees need to be inducted and a typical “day-pass” induction might not necessarily cover all the relevant technical documents or safety procedures.Workers are often not aware of all the resources available to them to do their job safely.
- Security permissions are not always in place; a common situation is temporary workers who do not have network accounts.
We have seen that in typical industrial sites even the most basic of safety procedures, for example the most up to date permit to work procedure, is not readily available to most of the people working in the plant. If needed, individuals must request it or look for it in a separate system.
Clearly a balance is required between tight control of procedure documentation and making information easily accessible to all that need it.
Linking IntelliPERMIT with Controlled Safety Documents
Fortunately, IntelliPERMIT helps solve this problem by allowing controlled documents to be linked directly from the permit system so that they can be directly accessed at exactly the right time by the right people in the process. Linked documents, if required can be printed together with the permit itself and therefore be accessible to workers in the field.
Having documents linked into the permit process has the added advantage of a single interface for end users to access what they need, without the requirement for complex searches in a separate controlled document system. By linking documents to IntelliPERMIT, they still remain in the controlled system, while at the same time being visible to those that most need them.
By linking controlled documents to IntelliPERMIT a number of other benefits are possible. Some specific examples are:
- The ability to automatically link rescue plans and drawings to items of equipment where confined space permits are being generated.
- The ability to link standard isolation lists to controlled P&ID’s.
- The ability to show permit to work procedures and related standards directly from the IntelliPERMIT home page.
- The ability to attach controlled and uncontrolled documents to individual permits – for example risk assessment templates or photographs.
- The ability to include important emergency procedures and site information directly on the permit certificate.
In the example below, a document is being added to IntelliPERMIT and is linked to specific hazards. Then when these hazards are identified as relating to a particular job, the linked documents (which might be standard operating procedures) are made available in the permit itself:
Another example screenshot shows how drawings might be presented when viewing a permit on the system:
Optimising the way controlled safety documents are linked into IntelliPERMIT
Linking controlled documents into the permit system does require some upfront planning during configuration of the relevant systems. Only relevant documents should be linked, and ideally only in the context where they are required (e.g. plant area, or step in the process). Furthermore, the documents themselves need to be written in plan, easy to understand and clear language, suited for the plant personnel or workers.
Fortunately, the interfaces themselves are not that complex and Adapt IT’s IntelliPERMIT consultants have experience in integrating IntelliPERMIT with a number of document management systems. It is recommended that these document links be reviewed from time to time to ensure that all changes have been properly incorporated into the permit system. This review can be included in the scope of a regular system health check.
Conclusion
Linking controlled documents to the permit is a simple concept that has a significant impact on the way safety management systems such as ISO 45 000 are implemented in practice. The permit to work is where the “rubber hits the road” and the most logical place to have the most important safety procedures and information collated. IntelliPERMIT does not replace the requirement for a proper safety management system, nor for a proper document control system. It does however make such systems effective where it most matters, in the field and on the plants where dangerous work is taking place.
To learn more about IntelliPERMIT and linking controlled documents please contact the IntelliPERMIT team at Adapt IT.
